Canopy for 75/90

[mistermikev]

OK well, here is the long awaited cutlist (as if you care).

Lbl Name Qty Size Stock
A) face 1: 3/4 x 2 x 48 11/16e : 1 x 2 x 6' door jam material
B) face 1: 3/4 x 7 1/4 x 48 11/16 : 1 x 8 x 6'
C) sides 2: 3/4 x 9 1/4 x 18 : 1 x 10 x 4'
D) back 1: 3/4 x 5 1/4 x 48 3/16e : 1 x 6 x 6'
E) top 2: 3/4 x 5 1/4 x 50 3/16 : 1 x 6 x 6'
F) top 1: 3/4 x 7 1/4 x 50 3/16 : 1 x 8 x 6'
G) trim 1: 3/4 x 5 1/4 x 50 3/16 : 1 x 6 x 6'
H) trim 2: 3/4 x 5 1/4 x 19 1/2 : 1 x 6 x 4'
I) brace 1: 3/4 x 2 x 17 1/4e : 1 x 2 x 4' door jam material
J) clete 1: 3/4 x 9 1/4 x (cutoff)

e = cuts that must be exact

Lost my drawing so maybe I'll redraw someday soon.
enjoy!

[mistermikev]

ps the door jam material is the only thing I couldn't find in oak, but it is covered completely by the trim anyway. It was found in the area of menards where they keep the door jam material. It is 2" actual stock (not 1 1/2 actual like most 2" stock). Other than that all these peices can be found easily at your local hardware store.