Maybe this will help: http://www.icecapinc.com/660.htm Check out the 660 wiring diagrams.
Ninong
P.S. - Moved to Lighting Forum.
i bought a used not working 660
it has a blow fuse and missing wires orange purple and brown
i have on the top row
red
blue
blue
empty hole
empty hole
empty hole
empty hole
yellow
on the bottom row i have
black
green
white
empty hole
red
empty hole
empty hole
yellow
please help me find what color goes in the empty holes.Eddie
Maybe this will help: http://www.icecapinc.com/660.htm Check out the 660 wiring diagrams.
Ninong
P.S. - Moved to Lighting Forum.
Be careful...you don't know what may have been done to that ballast. I checked my Icecap 660 3 times...here is what I have. The 'Top' row is the row closest to the 'top' of the ballast. The 'bottom' row is the row closest to the back plate of the ballast. (When the clip is inserted into the ballast.)
You may want someone to confirm this from their 660. Or even better, order a new wiring harness directly from Icecap.
If you use this info, you assume all responsibility for the consequences:
Top row...reading left to right:
Orange
Blue
Blue
Red
Yellow
Brown
Black
Purple
Bottom row...reading left to right:
Black
green
white
empty
orange
yellow
red
purple
HTH, good luck
-Todd
I was just at the Icecap site. The clip you describe might be from a 430. Are you sure that you have a 660 ballast?
-Todd
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks