Caqlcium Reactor for trade

Royce · 06-04-2002, 01:19 AM

I have 2 Dual Stage Calcium Reactors for trade. The one on the left is 23" tall, the one on the right is 21" tall. They hold about 6 - 8 lbs. of media. They come with bubble counter, check valve, and all fittings.
They need the following to be setup and running :
Mag 2 or Mag 3 for circulation.
Supply pump or Tee off of return pump. I use a Maxi Jet 400 mounted in my sump.
C02 Tank and regulator.
Media.
I also use a PH probe to monitor effluent from Reactor.

I am looking to trade for a pump for my skimmer. I need something stronger than the current Mag 12 I am now using.

I also need a dual 400 watt PFO MH ballast HQI. I want to change over to 20 K Radium bulbs from my current 250 watt 12 K setup.
Thanks
Royce

06-04-2002, 01:19 AM	#1
Royce New in Town Join Date: Jun 2002 Location: Rockwall, Texas Posts: 2	Calcium Reactor for trade I have 2 Dual Stage Calcium Reactors for trade. The one on the left is 23" tall, the one on the right is 21" tall. They hold about 6 - 8 lbs. of media. They come with bubble counter, check valve, and all fittings. They need the following to be setup and running : Mag 2 or Mag 3 for circulation. Supply pump or Tee off of return pump. I use a Maxi Jet 400 mounted in my sump. C02 Tank and regulator. Media. I also use a PH probe to monitor effluent from Reactor. I am looking to trade for a pump for my skimmer. I need something stronger than the current Mag 12 I am now using. I also need a dual 400 watt PFO MH ballast HQI. I want to change over to 20 K Radium bulbs from my current 250 watt 12 K setup. Thanks Royce Last edited by Royce; 06-04-2002 at 01:14 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)