[Rp Marine]

PRO 18" Hang On Refugium

· 18"L x 12"H x 4"W



how does this work? i know i need a power head to pump the water in but were would the water go out on the right side. and if so to it have to be above the water leve or can it go in to the tank water level?

[SteveP]

Originally Posted by Rp Marine

PRO 18" Hang On Refugium

· 18"L x 12"H x 4"W



how does this work? i know i need a power head to pump the water in but were would the water go out on the right side. and if so to it have to be above the water leve or can it go in to the tank water level?

If you pump water into the left side, it will rise until it overflows the baffle at the right, and then judging by the picture, it would overflow the pipe on the right and back into the tank.

My concern would be having any pump that pushes water out of the tank, because if that return pipe gets blocked, or there is an imbalance in the return water flow versus the pump speed, you'll end up overflowing the box and making your carpet wet. I'd much rather see a siphon/overflow setup with a return pump - that way the siphon will stop when the water level is equal to the tank level, and the setup would be fail safe.

Steve

[Rp Marine]

do you think i need to do any mod to this?