How to flush R06100DINT unit (From Ebay)

CaptainK · 01-09-2005, 01:23 PM

Hi ALl,
Does anyone know how to flush the RO6100DINT RO/DI unit that comes from Filter Direct on ebay?

Also where is a good place to get the replacement cartridges for this unit?

Thanks,
CaptK

dougc · 01-10-2005, 11:45 PM

Filter cartridges and RO membranes are pretty much standard. Most hobby RO filters have 10" cartridges and the membrane housings are standard. I have a Kent filter, but use a DI cartridge and RO membrane from Aquatic Reef Systems. They are half the price of the equivalent Kent replacements and, according to my TDS meter, do just as good a job. If you replace your RO membrane with another brand, just make sure that it is the same (or close) Gallons Per Day rating. Otherwise, you would have to replace the flow restrictor to match the membrane. I am using a ARS 50 GPD membrane on my 60 GPD RO filter and it works just fine.

01-09-2005, 01:23 PM	#1
CaptainK Mayor Join Date: Jul 2000 Location: MA. Posts: 534	How to flush R06100DINT unit (From Ebay) Hi ALl, Does anyone know how to flush the RO6100DINT RO/DI unit that comes from Filter Direct on ebay? Also where is a good place to get the replacement cartridges for this unit? Thanks, CaptK

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kent ro unit for sale or trade	k9anna	For Sale or Trade Zone	1	10-31-2004 08:35 PM
Borneman Flush Device, has anyone tryed it?	Pomme	DIY	8	02-13-2004 10:21 AM
Aquatic Reef Systems 100gpd RO/DI unit	thezookeeper	For Sale or Trade Zone	6	09-08-2003 04:48 PM
R/O unit leaking phosphate	bongobrian	Tanks, Filtration & Basic Equipment	13	11-22-2001 06:12 AM
Beware of eBay seller "mcfish3", aka Dr. Fish, aka caribbeancreatures.com	Rob	Reef Aquariums	17	10-11-2001 06:10 PM

01-10-2005, 11:45 PM	#2
dougc Contributing Member Join Date: Jul 2000 Location: Cherry Hill, NJ Posts: 484	Filter cartridges and RO membranes are pretty much standard. Most hobby RO filters have 10" cartridges and the membrane housings are standard. I have a Kent filter, but use a DI cartridge and RO membrane from Aquatic Reef Systems. They are half the price of the equivalent Kent replacements and, according to my TDS meter, do just as good a job. If you replace your RO membrane with another brand, just make sure that it is the same (or close) Gallons Per Day rating. Otherwise, you would have to replace the flow restrictor to match the membrane. I am using a ARS 50 GPD membrane on my 60 GPD RO filter and it works just fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)