|
|
Calcium reactor problem |
|
|
Calcium reactor problem |
|
||||||
09-01-2001, 05:21 PM
|
#1 |
|
Just Moved In
Join Date: Oct 2000
Location: NJ
Posts: 37
|
Calcium reactor problem
I've been running my dual chamber MTC Pro Cal reactor for about a week with ARM Media in both cylinders. The effluent out of the reactor: Dkh is 12 and the calcium is 400ppm and drip reate is 20 ml/min. The bpm is about 100. It seems that this stuff isn't dissolving the way it should. The ph out the reactor is 7.4 . I've used the ARM in the past and never had a problem with it dissolving. I also checked the calcium reactor and it appears to be working fine. Any suggustions why my dkh and calcium are so low coming out of the reactor. I've used the Florida Crushed Coral media in the past and my bpm was not as high as it is now and had no problems keeping my dkh and calcium up. Any ideas?
|
|
|
| Sponsored Links |
|
|
|
09-04-2001, 05:38 PM
|
#2 |
|
Just Moved In
Join Date: Aug 2001
Posts: 15
|
BEST MEDIA!
MY FRIEND try a media called coralith! i`ve tried all other`s this one give`s me the best result`s. also efluent should be between 6.5-6.8 good luck.
 |
|
|
|
Linear Mode
