?'s for Black cap

wastedincome420 · 02-01-2003, 06:35 PM

I saw your post over in the Reef forum on a reply to 300g tanks. I have a few questions for you but didn't want to stray of subject in some one else's thread

I too am going to be using a motorized 3-way valve set up for my closed loop. The one I'm going with is made by jandy (who like Hayward makes pool plumbing,etc.)
Any how it looked like from the pics you used mostly drain fittings on the plumbing. Have you had any problems with that where you running such strong pumps?? I cant tell from the pics what the level of the tank is is but it looks like the valve is much higher then the tank and then plumbed down to the returns

Also what do you have for the reurns on the CL?? SS's??
I believe your friend was right about setting the cycle to be 20+mins. How's your corals seem to like it??
Sorry for so many questions

Mark

**golfish** · 02-03-2003, 01:29 PM

Mark,
I don't know if Blackcap will visit this forum ( I hope so because I forgot to ask about that yesterday) I was at his house yesterday for the first time. I knew he had the ball valve but I forgot to ask about it. It looks like its about 4 or 5 feet above the tank (not sure) and feeds to two 1" pvc pipes on each side. He also has a SS in the middle of the tank..

He has two 1" PVC inlets on each end, I'm not sure if he feeds one pipe on each side each time the valve turns or if he feeds the two pipes on one side. I would think he's always feed the SS.

HTH

wastedincome420 · 02-03-2003, 07:16 PM

Golfish: Thabks for offering what you could for info on Black caps tank.
I hope that he does come and check this forum out. So how his tank look??

**golfish** · 02-03-2003, 07:23 PM

Mark,
He has a very nice tank, we traded a few frags, talked about some people we both know and just kind of hung out for a while. I'll tell you this, he has a huge skimmer, its an ETSS. I think he said it was a 2500...This sucker's like 6 feet tall.

Hey, I'm sure he wont mind you e-mailing him. In case you didn't notice his e-mail address is on the pictures he posted.

wastedincome420 · 02-03-2003, 07:27 PM

Thanks Golfish I'll try shooting him a e-mail

wastedincome420 · 02-19-2003, 03:26 AM

Bump up

02-01-2003, 06:35 PM	#1
wastedincome420 Council Join Date: Oct 2001 Location: NH Posts: 270	?'s for Black cap I saw your post over in the Reef forum on a reply to 300g tanks. I have a few questions for you but didn't want to stray of subject in some one else's thread I too am going to be using a motorized 3-way valve set up for my closed loop. The one I'm going with is made by jandy (who like Hayward makes pool plumbing,etc.) Any how it looked like from the pics you used mostly drain fittings on the plumbing. Have you had any problems with that where you running such strong pumps?? I cant tell from the pics what the level of the tank is is but it looks like the valve is much higher then the tank and then plumbed down to the returns Also what do you have for the reurns on the CL?? SS's?? I believe your friend was right about setting the cycle to be 20+mins. How's your corals seem to like it?? Sorry for so many questions Mark

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-03-2003, 01:29 PM	#2
golfish Moderator Join Date: Jun 2000 Location: Alta Loma,Ca Posts: 2,925	Mark, I don't know if Blackcap will visit this forum ( I hope so because I forgot to ask about that yesterday) I was at his house yesterday for the first time. I knew he had the ball valve but I forgot to ask about it. It looks like its about 4 or 5 feet above the tank (not sure) and feeds to two 1" pvc pipes on each side. He also has a SS in the middle of the tank.. He has two 1" PVC inlets on each end, I'm not sure if he feeds one pipe on each side each time the valve turns or if he feeds the two pipes on one side. I would think he's always feed the SS. HTH

02-03-2003, 07:16 PM	#3
wastedincome420 Council Join Date: Oct 2001 Location: NH Posts: 270	Golfish: Thabks for offering what you could for info on Black caps tank. I hope that he does come and check this forum out. So how his tank look??

02-03-2003, 07:23 PM	#4
golfish Moderator Join Date: Jun 2000 Location: Alta Loma,Ca Posts: 2,925	Mark, He has a very nice tank, we traded a few frags, talked about some people we both know and just kind of hung out for a while. I'll tell you this, he has a huge skimmer, its an ETSS. I think he said it was a 2500...This sucker's like 6 feet tall. Hey, I'm sure he wont mind you e-mailing him. In case you didn't notice his e-mail address is on the pictures he posted.

02-03-2003, 07:27 PM	#5
wastedincome420 Council Join Date: Oct 2001 Location: NH Posts: 270	Thanks Golfish I'll try shooting him a e-mail

02-19-2003, 03:26 AM	#6
wastedincome420 Council Join Date: Oct 2001 Location: NH Posts: 270	Bump up

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)